I do have an option for you but the MaxxTow Ball Mount w/ 2" Accessory Receiver part # MT70066 is not offered with a 6" drop. The only option we have that would allow you to mount a hitch ball that far below the receiver tube and then place a hitch mounted accessory above this would be with the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers part # 325-GH-404 for 5" drop or part # 325-GH-504 for 7-1/2" drop.
If you placed the 2-Ball Mount part # 325-GH-031 in the bottom receiver tube... view full answer...
The thread size that's on the back of the Phoenix Faucets Accessories and Parts # PF213248 that you referenced is the standard RV water fitting size of 13/16 inch like what the shower hoses use. view full answer...
The Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches Hidden Rack Receiver # 391CONVPT5L is an upgrade kit for a Stealth hitch that came only with the opening for a hitch accessory like a ball mount. So it looks like you have a 2020 Kia Telluride and that would mean you would want this kit if you had bought the # 391KIATELL20 which comes with just the accessory hitch opening accessory.
If what you really wanted was all of it together as one part number you'd just want the... view full answer...
They both will last a long time but I would say the Rampage like part # RA772901 will last longer than the Classic Accessories cover part # 052963753875 reason being the Rampage is made of the same material Jeep soft tops which are very durable and the Classic is made of vinyl. view full answer...
I checked with Classic Accessories and they sent me a PDF file that shows what they referred to as "generic folding instructions" which would be applicable to the Classic Accessories Enclosure part # 052963720525. I attached the picture to this page. view full answer...
There are two accessories that I recommend for the Curt Cargo Carrier, part # C18110.
I would take a look at the etrailer Hitch Pin Alignment Collar for Bike Racks and Cargo Carriers - 1-1/4" Hitches
Item # e58ZR to make installing it easier. Then for a cargo net I recommend is part # CS54FR to secure your belongings. view full answer...
The covers like the Classic Accessories PolyPro III Deluxe Class C RV Cover # 052963794632 that you referenced do not have pockets in them for roof accessories because not all RVs have their roof accessories in the same location. So instead they make the top of the covers large enough they they easily accommodate the accessories regardless of where they are. I looked up the length of your 2019 Jayco 26 R Redhawk and it matches perfectly with the part # 052963794632 as well. view full answer...
This is a great question. The Curt Class I hitches do not have the weld stop built in to them to prevent a Class II accessory from installing. So you would be able to slide a Class II accessory into the opening.
That being said we don't recommend using Class II accessories with Class I hitches as that voids the warranty. view full answer...
The great thing about the Rhino Rack roof rack part # RR37GR that you referenced is that the bars are basically compatible with all roof rack accessories made by the popular brands like Thule, Yakima, and Rhino Rack etc.
For a fork mounted Rhino Rack bike rack we have the MountainTrail part # RBC035 which would work great, and for a kayak carrier we have the # S510 which is a J-style kayak carrier.
If you were looking for something more specific let me know and I'll see what would be... view full answer...
The real difference in which to get between the Yakima LoadWarrior with Extension, part # Y07070-74 and the Thule Canyon XT, part # TH859XT-8591XT will be between what kind of load bars you have equipped to the 2017 Toyota 4Runner and how its planned to be used. Additionally, if you have any other Thule or Yakima accessories should be a part of the decision.
If you have Yakima's round bars or the 4 Runner factory bars, the LoadWarrior will be easier to install onto these and the LoadWarrior... view full answer...
As long as the hitch accessory has a hollow shank the anti-rattle device part # 63232 would be what I would recommend. This doubles as a hitch lock and will do a great job removing any movement between the hitch and accessory.
The Roadmaster Quiet Hitch part # RM-061 is another great option for removing movement. Especially if the accessory does not have a hallow shank. view full answer...
The vast majority of rooftop mounted accessories nowadays work with all different kinds of crossbar shapes such as round, square, aero/elliptical and most factory crossbars. If you're having issues with the accessories moving when used with round bars, try wrapping the bar where the clamp grabs on with electrical tape. The only way around this would be to switch over to the more common aero shaped bar. There isn't any sort of adapter for this so you'd need a new system which will depended... view full answer...
Yes, the Rhino Rack Pioneer Platform Accessory bars part # RR43120B that you referenced will allow you to install the Yakima SkyBox 12 part # Y07334 that you are interested in! I attached a picture that shows a cargo box attached to these bars for you to check out as well. view full answer...
The Yakima Rack and Roll Trailer, # Y08107 that you linked to has 78" Yakima round crossbars included. The round crossbars slide along tracks to adjust to your load, and they accept all Yakima roof-rack accessories that are of clamp-on design.
The Yakima DeckHand Kayak Carrier - Saddle Style, # Y04083-2 will work with the Yakima Rack and Roll Trailer, # Y08107. view full answer...
We sure do!
Our most often recommended locking hitch pin is the Stainless Steel etrailer brand locking hitch pin, part # e98882. This is a non-threaded hitch pin that works great with ball mounts or hitch accessories that don't require a threaded hitch pin. If the hitch accessory you're using has a hollow shank, we offer an anti-rattle locking hitch pin, part # 63232. This anti-rattle hitch pin dramatically reduces any movement or vibration of your ball mount in your hitch. Included lock... view full answer...
The correct anti rattle really all depends on what kind of accessory you are using.
If you are using a hollow shank accessory, I recommend using the Curt Anti Rattle Kit Part # C22321. All you have to do is insert the bracket into the shank of your accessory, then insert the threaded hitch pin, tighten it down and your accessory will be as solid as the hitch. You will need to have a wrench whenever you install or remove the accessory. Here at etrailer we use Part # PTW38106-24 in the... view full answer...
I do have an option for you but the bunk boards on the CE Smith Multi Sport Plus Boat and Kayak Trailer part # CE48870 would be much too large for use with rooftop mount accessories. The best option we have to convert this trailer for carrying rooftop mounted accessories is with the Malone Crossbar Conversion Kit part # MPG475 which you'd need to find a way to attach. view full answer...
The Rhino Rack accessories do not have the same keyed alike setups that the Yakima and Thule racks offer. With Yakima or Thule you can replace the lock cores so that all of the accessories would take the same key.
For your 2010 Subaru Forester with raised siderails you would want to go with a roof rack like the Thule Aeroblade Edge part # TH7502-TH7502 and then the Thule part # TH7324.
Then for matching keys and lock cores you would want the part # TH450800 . view full answer...
The Thule SquareBar Evo Crossbar System part # TH712200, part # TH460R, and part # THKIT3028 is a great option for a 2015 BMW 3 Series Sedan. It has square crossbars which although newer, have the same dimensions as the older design so you can reuse all your old accessories no problem. view full answer...
To use a hitch lock on Curt Class III 2 Inch Hitch, part # 13577, I would recommend the Trailer Hitch Receiver Lock, part # e98880. If you want a hitch lock that also includes an anti-rattle device you can use the Softride Anti-Rattle Device and Lock for 2 Inch Trailer Hitches, part # SR25219.
If you are using a hitch bike rack or hitch accessory on your hitch you will need to use a hitch lock designed for that particular brand of hitch accessory. Most of the hitch accessory manufacturers... view full answer...
Go To Results